
Yesterday I spent some time working on the curved sashing for the Curve It Up quilt and I realized there was another way to do it. I didn’t want to have a seam running down the center of the designs so figured out how to do it using one piece of focus fabric for each section. Jenny did a great tutorial on how to do the curve sashing design, you can find it here, but thought I would share my version as I know a few of my readers are doing this Quilt Along too.
First cut a 5 1/2” square from the focus fabric and then cut 4 squares from the background fabric that are 2 5/8”. Draw a diagonal line on the background squares and lay them on the 5 1/2” square as shown.

Then sew along the diagonal lines. I like to stitch just off the line to the right as shown in the next picture. This allows the final square to be exactly 5 1/2”.

Once all four sides are stitched, trim to 1/4” and press to the focus fabric. You should have a 5 1/2” square.

Next is the curved section. Cut a 4” x9” rectangle from your focus fabric and follow Jenny’s instructions for cutting the curve but cut on both sides of the rectangle.

Then cut the background pieces following Jenny’s instructions and attached them to the focus fabric.

Then trim the curved block down to 5 1/2” x 8 1/2”, being careful to center the design and have the two ends of the focus fabric be around 3/8” wide at the outside edge.

Here are the two pieces sewn together. The focus fabrics should connect for a total of about 3/4” at the seam creating a continuous border. I did manage to dye 3 meters of grey background that matched my original fabric pretty well, yeah! I hope I decide on a focus fabric color soon as I still have to dye that fabric and I really want to finished this project as I have really enjoyed it!
